72631901 Removing and installing lock for 1/3-split folding rear backrest

WM 726319 Removing and installing lock for 1/3-split folding rear backrest

Technical values






Removing lock for 1/3-split folding rear backrest





1. Folding rear backrest forward
2. Remove cover for rear backrest.
2.1. Unclip cover for rear backrest -1- at fastening clips -2- -Arrows A- and pull out to the right -Arrow B-.









3. Remove cover of lock for rear backrest.
3.1. Unscrew fastening screws -4- , -5-.
3.2. Remove cover of lock for rear backrest -3- by pulling it forwards -Arrow C-.









4. Disengage cover piping -7- -Arrow D-.





5. Undo fastening screws -8-.





6. Pull out lock for backrest -6- -Arrow E-.






Installing lock for 1/3-split folding rear backrest





1. Insert lock for backrest -6- -Arrow A-.





2. Screw in fastening screws -8- and tighten to the specified torque. => Tightening torque: 20 Nm (15 ftlb.)+/-2 Nm (+/-1.5 ftlb.)





3. Engage cover piping -7- -Arrow B-.





4. Insert cover of lock for rear backrest -3- -Arrow C-. The release lever guides -9- must engage perfectly in the supports of the locking mechanism -10-.









5. Screw in fastening screws -4- ,=> Tightening torque: 4.5 Nm (3.5 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) Screw in fastening screw -5-.=> Tightening torque: 2.5 Nm (2.0 ftlb.)+/-0.2 Nm (+/-0.2 ftlb.)









6. Install cover for rear backrest.
6.1. Insert cover for rear backrest -1- -Arrow D- and clip in on the fastening clips -2- -Arrows E-.









7. Fold rear backrest back.