Fog/Driving Lamp Bulb: Service and Repair

Removing And Installing Bulb For Fog Light

Preliminary work
1. Release wheel housing liner in the front area.

Removing bulb for fog light

WARNING:
Risk of short circuit.
- Before removing bulb, remove ignition key and switch off light switch.







1. Release connector -1- ( -arrow A- ) and pull off from fog light -2- ( -arrow B- ).







2. Turn bulb for fog light -1- anti-clockwise ( -arrow A- ) and remove from the fog light -2- ( -arrow B- ).

Installing bulb for fog light







1. Insert bulb for fog light -1- into the fog light -2- ( -arrow A- ) and turn clockwise ( -arrow B- ) until the bulb for fog light -1- engages securely.







2. Push connector -1- onto the fog light -2- ( -arrow- ) until the connector -1- engages securely.

Subsequent work
1. Secure wheel housing liner in the front area.