905819 Installing and removing socket
WM 905819 Installing and removing socket
Preliminary work
Remove cover under instrument panel on the passenger's side. -> 702219 Removing and installing trim under instrument panel - section on "removing" 702219 Removing and Installing Cover Under Dashboard
Removing socket
Removing passenger's socket
Overview of sockets
1. Release -a- and pull off plug.
Pulling plug off the passenger's socket.
2. Open socket cover and press out the passenger's socket -arrow-.
Removing luggage compartment socket
Overview of sockets
1. Remove the side panel cover at the left or right.
2. Release plug connection -a- and disconnect.
Disconnecting plug connection for luggage compartment socket
3. Pull the trim towards the front and use an open-ended wrench 30 to hold the fastening nut behind the trim tight and screw the socket out.
Removing luggage compartment socket
Information
- Ensure the fastening nut does not fall out behind the trim.
Information
- Ensure the fastening nut does not fall out behind the trim.
4. Remove the open-ended wrench and hold the fastening nut with the hand.
5. Screw out the socket from the trim. Remove the fastening nut.
Installing socket
Installing passenger's socket
1. Open the socket and insert it as far as it will go.
Installing passenger's socket
2. Press in the connector until it is felt to engage.
Installing luggage compartment socket
1. Feed the electrical lead through the trim and slide the fastening nut behind the trim over the lead.
Installing luggage compartment socket
2. Hold the fastening nut with an open-ended wrench and screw in the socket as far as it will go -arrow-.
3. Push the electrical plug connection together until the plug is felt to engage.
4. Fit the side panel cover at the left or right.
Subsequent work
Installing trim under instrument panel on the passenger's side. -> 702219 Removing and installing trim under instrument panel - section on "installing" 702219 Removing and Installing Cover Under Dashboard