972019 Removing and Installing Wire Harness For Centre Console
WM 972019 Removing and installing wire harness for centre console
Preliminary work
1. Remove centre console. -> 681719 Removing and installing centre console - section on "Removing" 681719 Removing and installing centre console
Removing wire harness for centre console
Installation position of wire harness for centre console
Overview of wire harness for centre console
1. Remove light in oddments tray.
1.1. Lever out the light in the oddments tray using a screwdriver -Arrow A- and remove it.
Removing light in oddments tray
1.2. Release the connector -Arrows B- and pull it off -Arrow C-.
2. Unscrew fastening screws -1-.
Loosening oddments tray
3. Remove the centre console vent. -> 887519 Removing and installing vent - section on "Removing" 887519 Removing and installing vents
4. Unscrew fastening screws -1- and remove air duct in a downward direction -Arrow-.
Removing air duct in centre console
5. Remove contact switch in oddments tray.
Removing contact switch for centre console light
5.1. Press in contact switch -Arrow A-.
5.2. Release the contact switch with a small screwdriver -Arrows B- and take it out of the bracket -Arrow C-.
6. Release the connector -Arrow A- and pull off the contact switch -Arrow B-.
Disconnecting contact switch for centre console
7. Carefully press the frame down using a screwdriver -Arrow A- and remove the wire harness -Arrows B-.
Removing wire harness for centre console
8. Release the socket -Arrow A- and pull it off the clip -Arrow B-.
Releasing socket for main wire harness
Installing wire harness for centre console
1. Carefully press the frame down using a screwdriver -Arrow A- and place the wire harness in installation position -Arrows B-.
Installing wire harness for centre console
2. Push connector onto the clip -Arrow A- until locking lug -B- is felt to engage.
Securing socket for main wire harness
3. Push contact switch onto the connector -Arrow A- until the locking lug -B- is felt to engage.
Inserting contact switch for centre console light
4. Press the contact switch against the oddments tray in the centre console -Arrow A- and clip it in -Arrow B- until the locking lugs -C- are felt to engage.
Installing contact switch for centre console
5. Install light in oddments tray.
5.1. Push the connector onto the light -Arrow A- until locking lugs -B- are felt to engage.
Installing light in oddments tray
5.2. Clip in the light in the oddments tray -Arrow C-.
6. Insert the air duct from below -Arrow- and secure with fastening screws -1-.
Installing air duct
7. Secure the oddments tray with fastening screws -1-.
Loosening and securing oddments tray
8. Install centre console vent. -> 887519 Removing and installing vent - section on "Installing" 887519 Removing and installing vents
Subsequent work
1. Install centre console. -> 681719 Removing and installing centre console - section on "Installing" 681719 Removing and installing centre console