Removing and Installing Sealing Ring For Selector Shaft

WM 373319 Removing and installing sealing ring for selector shaft








Preliminary work

Preliminary work for sealing ring for right selector shaft

1. Remove multi-functional switch.

Preliminary work for sealing ring for left selector shaft

1. Remove engine guard.

Removing sealing ring for selector shaft

Removing sealing ring for right selector shaft

1. Remove sealing ring with sharp tool, such as a scriber. -Graphic-





Removing sealing ring for selector shaft

Removing sealing ring for left selector shaft

1. Remove retaining clip -A- on the holder.





Selector lever cable to transmission

2. Unscrew selector lever cable from the ball joint with universal disassembly tool NR.21.





Removing selector cable from transmission

3. Unscrew fastening nut -B- on selector shaft and remove lever.





Selector lever cable to transmission

4. Push a sharp tool, e.g. scriber, into the sealing ring and remove it. -arrows-.





Removing left sealing ring

Installing sealing ring for selector shaft

Installing sealing ring for right selector shaft

1. Press new sealing ring with special tool pressure sleeve T10174 as far as the pressure sleeve on the transmission housing.





Installing sealing ring for selector shaft

Installing sealing ring for left selector shaft

1. Position new sealing ring -Arrow-.





Positioning sealing ring

2. Press new sealing ring with special tool pressure sleeve T10174 as far as the pressure sleeve on the transmission housing. -Arrow-





Driving in the sealing ring

3. Position selector lever on selector shaft and screw in fastening nut. - Tightening torque: 15 Nm (11 ftlb.)
4. Attach tab washer -A- to the cable holder on the transmission side.





Selector lever cable to transmission

5. Press cable on the ball joint -Arrow-.

Subsequent work

Reworking for sealing ring for right selector shaft

1. Install multi-functional switch.

Reworking for sealing ring for left selector shaft

1. Fit engine guard.