926619 Removing and Installing Spray Nozzle

WM 926619 Removing and installing spray nozzle

Removing spray nozzle

1. Open the bonnet.
2. Switch off ignition and remove ignition key.
3. Disengage cover -arrow A- , disconnect the electrical plug connection -arrow B- and pull the hose connection -arrow C- apart.





Removing spray nozzle cover

4. Pull the spray nozzle downwards -arrow A- and remove from the bonnet -arrow B- along with the connections.





Releasing spray nozzle

Installing spray nozzle

1. Insert spray nozzle along with the lines under the bonnet -arrow A- and engage -arrow B-.





Installing spray nozzle

2. Insert the lines through the opening, connect electrical plug connection -arrow B- and connect the water feed line -arrow A-. Position the cover -arrow C- under the bonnet.





Fitting cover for spray nozzle

Adjusting spray nozzles

NOTICE

Incorrect handling of spray nozzles

- Risk of damage to spray nozzles

-> Do not insert sharp objects into the nozzle bore.

Information

- The angle of the spray nozzle can be adjusted without the use of a tool, i.e. it can be adjusted by hand.

- The recommended spraying range is in the central position.

- Risk of damage to spray nozzles.

1. Close the bonnet.
2. Adjust the spray height -arrow-.





Adjusting the spray height