Removing and Installing Cover For Centre Underbody

Removing And Installing Cover For Centre Underbody

Technical values







Preliminary work

Lift the vehicle. Refer to Lifting the vehicle.

Removing cover for centre underbody

Removing cover for side underbody







INFORMATION: Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -2- and fastening nuts -3-.







2. Pull cover for side underbody -1- out of the overlaps.

Removing cover for centre underbody







INFORMATION: Fastening nuts cannot be used again following removal.

1. Unscrew fastening nuts -3-.







2. Press covers for side underbody down slightly and remove cover for centre underbody -4- from overlaps.

Installing cover for centre underbody







INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for centre underbody -4- while pressing covers for side underbody slightly down.







2. Tighten fastening nuts -3-. Tightening torque: Final tightening: 1.5 ftlb.

Installing cover for side underbody







INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for side underbody -1-.







2. Tighten fastening screw -2-. Tightening torque: Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque: Final tightening: 1.5 ftlb.

Subsequent work

Lower the vehicle. Refer to Lifting the vehicle.