Removing and Installing Auxiliary Headlight

Removing And Installing Auxiliary Headlight

Removing auxiliary headlight







NOTE:
Voltage peaks
- Risk of damage to load or to the control unit
- Remove the ignition key and switch off load before disconnecting or removing load.







1. Unclip cover from the front apron -arrow-.
2. Loosen auxiliary headlight.
2.1. Unscrew the two fastening screws -1 -.







2.2. Pull out the auxiliary headlight -arrow- until the connector is accessible.







3. Release connector -arrow A- and pull it off the auxiliary headlight -arrow B-


Installing auxiliary headlight







1. Push connector onto the auxiliary headlight -arrow- until it engages securely.







2. Insert auxiliary headlight into the front apron -arrow- and secure with the two fastening screws -1-.







3. Insert cover into the front apron with the guides and clip it in -arrow-