Removing and Installing Auxiliary Headlight

Removing And Installing Auxiliary Headlight

Removing auxiliary headlight












1. Lift up cover for auxiliary headlight from below and unclip it from the front apron.







2. Unscrew the three fastening screws -1- and remove the headlights from the front apron.







3. Release the electric connector from the fog-light bulb -1- -A- and disconnect it, turn the holder for the parking light -2- (bayonet lock) and remove from the headlight.

Installing auxiliary headlamp
1. Insert parking light holder in the auxiliary headlight and lock it (bayonet lock). Push electric connector onto fog-light bulb until it clicks into place.







2. Position the auxiliary headlight in the front apron and secure it with the three fastening screws.







3. First, insert cover laterally -A-, then -B- in the front apron and clip it in.

Subsequent work

Subsequent work for auxiliary headlight

INFORMATION: On installing a new auxiliary headlight, the adjustment must be checked with a headlight adjustment unit and adjusted if necessary.







Using a Torx socket wrench (size 30), adjust the auxiliary headlight through the cover on the adjusting screw -2-.