519419 Removing and installing Cover For Rear Underbody

WM 519419 Removing and installing cover for rear underbody

- Preliminary work

- Removing cover for rear underbody

- Installing cover for rear underbody

- Subsequent work

Technical values





Preliminary work

Preliminary work

Raise the vehicle.

Removing cover for rear underbody





Installation position of cover for rear underbody

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -2- and fastening nuts -3-.





Removing cover

2. Remove cover for rear underbody -1-.

Installing cover for rear underbody

Installing cover for rear underbody

Information

When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for rear underbody -1-.





Installing cover

2. Tighten fastening screws -2- and fastening nuts -3-. -> Tightening torque: 2 Nm (1.5 ftlb.) -> Tightening torque: 2.5 Nm (2 ftlb.)

Subsequent work

Reworking

Lower the vehicle.