Keyless Entry Transmitter: Service and Repair

WM 966255 Replacing remote control

Disassembling remote control

Removing cover of hand-held transmitter

1. Insert a small screwdriver between the cover and the bottom part of the hand-held transmitter -arrow- and carefully lift off the cover.





Removing cover of hand-held transmitter

Removing hand-held transmitter key

1. Push the sliding latch back using a small screwdriver -arrow A- and pull the key out of the bottom part.





Removing hand-held transmitter key

Removing battery for hand-held transmitter

1. Loosen the locking tab -arrow a- and remove the battery.





Removing battery for hand-held transmitter

Assembling remote control

Installing battery for hand-held transmitter

1. Insert battery and press it in until the locking tab clicks into place.





Installing battery for hand-held transmitter

Installing hand-held transmitter key

Information

The lock code from IPAS must be specified when ordering a new key.

1. Push the key into the bottom part until the sliding latch -arrow- engages perceptibly.





Installing hand-held transmitter key

Installing cover of hand-held transmitter

1. Position the cover on the bottom part of the hand-held transmitter and press together until the cover clicks into place.





Installing cover of hand-held transmitter