Front Bumper Bracket: Service and Repair

WM 633319 Removing and installing front bracket (impact pipe)

Technical values





Preliminary work

Removing front apron. -> 631519 Removing and installing front apron - "Removing"

Remove front bumper. -> 631019 Removing and installing front bumper - "Removing" section Service and Repair

Removing front bracket (impact pipe)

Removing front impact pipe





Installation position of front impact pipe

1. Undo fastening screws -1-.





Removing front impact pipe

2. Remove the impact pipe -2- and seal -3-.

Installing front bracket (impact pipe)

Install front impact pipe





Installation position of front impact pipe

1. Position the seal impact pipe -3- and impact pipe -2-.





Install front impact pipe

2. Screw in fastening screws -1- and tighten to the required tightening torque.=> Final tightening: 17 ftlb.

Subsequent work

Install front bumper. -> 631019 Removing and installing front bumper - "Installing" section Service and Repair

Installing front apron. -> 631519 Removing and installing front apron - "Installing"