706719 Removing and Installing B-Pillar Trim Panel

WM 706719 Removing and installing B-pillar trim panel

Technical values





Preliminary work

1. Remove weather protector. -> 610119 Removing and installing hood - section on "Removing"

Removing B-pillar trim panel





Installation position of B-pillar trim panel

1. Unscrew Tenax fastening screw -1- ( -arrow- ).





Removing trim panel

2. Unclip B-pillar trim panel -2- ( -arrow- ).
3. Check fixing clip -3- and replace if necessary.

Installing B-pillar trim panel

1. Position B-pillar trim panel -2- using the centring pins.





Installing trim panel

2. Press in B-pillar trim panel -arrow- until the locking lugs engage with an audible click.
3. Tighten Tenax fastening screw -1- ( -arrow- ). => Tightening torque: 3.5 Nm (2.5 ftlb.)

Subsequent work

1. Install weather protector. -> 610119 Removing and installing hood - section on "Installing"