Console Lamp Switch: Service and Repair

WM 962719 Removing and installing switch console

Preliminary work

Preliminary work for switch console

Remove air-conditioning control. -> 870219 Removing and installing air-conditioning system regulator - section on "Removing" Service and Repair

Removing switch console





Installation diagram for the 911

1. Switch off ignition and pull gearshift lever back.

Information

The switch console is clipped into the centre console.

2. Lift the switch console out of the centre console mounting using a screwdriver and pull it out.





Removing switch console

3. Release electric plugs and disconnect from the switch console.

Installing switch console

1. Insert electric plugs into the switch console until they click into place.
2. Slide switch console into the centre console and press until the switch console clips into place.





Inserting switch console

Subsequent work

Subsequent work for switch console

Install air-conditioning control. -> 870219 Removing and installing air-conditioning system regulator - section on "Installing" Service and Repair