705155 Replacing sound absorber (insulation) for passenger compartment
WM 705155 Replacing sound absorber (insulation) for passenger compartment
Preliminary work
1. Remove accessories close to the sound absorber (insulation).
Information
- The sound absorbers (insulation) must always be replaced if they are damaged or cracked.
2. Remove sound absorber (insulation).
3. Remove all adhesive residue on the body/accessories and clean with cleaning solution.
Installing sound absorber for passenger compartment
Installing sound absorber for rear convertible top rest
Installation position of sound absorbers for vehicle interior
Information
The fastening points must remain accessible when positioning the sound absorbers (insulation).
1. Pull off protective film and stick on sound absorber for convertible top rest -1- in the marked area.
Sticking on sound absorber for convertible top rest
2. Position sound absorber for the rear convertible top rest -1- and screw on plastic nuts -2-.
Installing sound absorber for rear convertible top rest
Installing sound absorber (insulation) for outer hood compartment
Information
The fastening points must remain accessible when positioning the sound absorbers (insulation).
1. Position sound absorber for outer hood compartment -1- and screw in plastic nuts -2-.
Installing sound absorber for outer hood compartment
2. Insert sound absorber for sides of hood compartment -1- and align it.
Sound absorber for sides of hood compartment
3. Insert sound absorber for rear of roll-over bar -1- and align it.
Installing sound absorber for rear of roll-over bar
4. Insert sound absorber for bottom of roll-over bar -1- and align it.
Installing insulation for bottom of roll-over bar
Installing sound absorber for firewall lid
Information
The fastening points must remain accessible when positioning the sound absorbers (insulation).
1. Pull off protective film and stick insulation for firewall lid -1- to the firewall lid -2-.
Installing sound absorber for firewall lid