Center Mounted Brake Lamp: Service and Repair

WM 947019 Removing and installing auxiliary brake light

Removing auxiliary brake light

1. Open the convertible top compartment lid using the convertible top release and remove ignition key.
2. Unscrew the two fastening screws -1- for the auxiliary brake light and turn the light 90°.





Unscrewing fastening screws

3. Release electric connector -A- and pull it off the light.





Unlocking the electric connector

Installing auxiliary brake light

1. Push electric connector onto the auxiliary brake light until the connector is felt to engage.





Screwing down the auxiliary brake light

2. Fit auxiliary brake light and screw down with the two fastening screws -1-.
3. Check operation of auxiliary brake light.