94571900 Removing and installing control unit for gas discharge

WM 945719 Removing and installing control unit for gas discharge

Preliminary work

Preliminary work on control unit for gas discharge

-> 941519 Removing and installing headlights - "Removing" section 94151900 Removing and installing main headlight

Removing control unit for gas discharge

Removing cap of main headlight

1. Unscrew four fastening screws -1- from the cap.





Fastening screws for cap

2. Release cap once at the top and twice at the bottom -a- and remove from the main headlight.





Releasing cap

Removing control unit for gas discharge

1. Unscrew the fastening screw -2- for the coil and pull the coil -3- out of the cap.





Unscrewing fastening screws and pulling out coil

2. Unscrew the two fastening screws -1- and remove the control unit.
3. Using a screwdriver, carefully release the electrical connector on the screwdriver and lever it out.





Releasing electrical connector with screwdriver

Installing control unit for gas discharge

1. Press in the electrical connector for the gas-discharge control unit until it clicks into place.





Connecting electric plug

2. Insert the control unit in the headlight cap and screw down with both fastening screws -1-.





Screwing down the fastening screws and the coil

3. Push on the coil and screw it down with the fastening screw.

Installing main headlight cap

1. Position cap on main headlight and press into place, making sure that the cap engages once at the top and twice at the bottom.





Positioning cap

2. Screw in four fastening screws -1- for the cap.





Screwing in the fastening screws

Subsequent work

Subsequent work on control unit for gas discharge

-> 941519 Removing and installing headlights - "Installing" section 94151900 Removing and installing main headlight