Parking Assist Distance Sensor: Service and Repair

WM 917519 Removing and installing sensor for ParkAssist

Preliminary work

Preliminary work - sensor for ParkAssist

=> Removing and installing rear apron - removing

Removing sensor for ParkAssist

Information

If one or more sensors must be replaced or repainted:

- Follow the painting specifications in the Paint Manual.

Information

If one or more sensors must be replaced or repainted:

- Follow the painting specifications in the Paint Manual.

1. Pull apart retaining tabs -a- and remove sensor -1-.





Removing sensor

2. Press detent -a- for connector -2- and pull connector off.

Installing sensor for ParkAssist

Information

If one or more sensors must be replaced or repainted:

- Follow the painting specifications in the Paint Manual.

Information

If one or more sensors must be replaced or repainted:

- Follow the painting specifications in the Paint Manual.

1. Slide the connector -2- onto the sensor -1- until it engages securely.





Installing sensor

2. Insert sensor into mounting point of bumper until the retaining tabs on the sensor engage.

Subsequent work

Subsequent work - sensor for ParkAssist

=> Removing and installing rear apron - installing