Glove Box Lamp Switch: Service and Repair

WM 960719 Removing and installing contact switch for glove compartment light

Preliminary work

Remove glove compartment. -> 681519 Removing and installing glove compartment - section on "removing" 681519 Removing and Installing Glove Compartment

Removing contact switch for glove compartment light

Information

The door switch for the glove compartment light is located on the rear of the glove compartment.





Overview of contact switch for glove compartment light, shown on the 911 cockpit

1. Release glove compartment light connector -arrows a- and unplug.





Unclipping wiring harness

2. Remove wire harness on the mounting points on the glove compartment -arrows-.
3. Release mounting points -arrows a- and take out the door switch for the glove compartment light -1- and the connector socket -2-.





Unclipping contact switch for glove compartment light

Installing contact switch for glove compartment light

1. Press the door switch for the glove compartment light -1- and the connector socket -2- in the mounting points, until they can be felt to engage.





Clipping in contact switch for glove compartment light

2. Lay the wiring harness and press in the mounting points on the glove compartment -Arrows-





Clipping in wiring harness

3. Insert the glove compartment light plug until it is felt to engage.

Subsequent work

Install glove compartment. -> 681519 Removing and installing glove compartment - section on "installing" 681519 Removing and Installing Glove Compartment