97701900 Removing and installing wiring harness for number plate light

WM 977019 Removing and installing wiring harness for number plate light

Preliminary work

Remove the rear apron.

Removing wiring harness for number plate light





Overview of wiring harness for number plate light

1. Remove wiring harness for number plate light from the four holders.





Removing wiring harness for number plate light from the four holders

2. Release connectors of both number plate lights -Arrow a- and pull them off.





Pulling off connector for number plate light

3. Release connectors of the four sensors for ParkAssist -Arrow a- and pull them off.





Pulling connector off a sensor for ParkAssist

Installing wiring harness for number plate light

1. Push connectors onto the four sensors for ParkAssist until they are felt to engage.





Pushing connector onto a sensor for ParkAssist

2. Push connectors onto both number plate lights until they are felt to engage.





Pushing on connector for number plate light

3. Insert wiring harness for number plate light into the four holders.





Inserting wiring harness for number plate light into the four holders

Subsequent work

Install the rear apron.