Utility Storage Compartment Door / Cover: Service and Repair

WM 700619 Removing and installing luggage compartment trim (loadspace cover)

Technical values





Removing luggage compartment trim (loadspace cover)

Removing luggage compartment trim panel (loadspace cover)





1. Disengage loadspace cover -1- from front connection points by pulling towards the rear.





2. Unscrew fastening screws -4-.





3. Unfold lashing tie-down ring strap.
4. Unscrew fastening screws -6-.





5. Remove tie-down rings -5-.





6. Remove loadspace floor at sides -2, 3-.






Installing luggage compartment trim (loadspace cover)

Installing luggage compartment trim panel (loadspace cover)





1. Position loadspace floor at sides -2, 3-.





2. Tighten fastening screws -4- to the specified tightening torque. => Tightening torque: 8 Nm (6 ftlb.)+/-1.5 Nm (+/-1.0 ftlb.)





3. Engage loadspace cover -1- in front connection points by pushing forwards and close loadspace cover.





4. Position tie-down rings -5-.





5. Unfold lashing tie-down ring strap.
6. Screw in fastening screws -6-.





7. Ensure gaps are even.
8. Tighten fastening screws to the specified tightening torque. => Tightening torque: 8 Nm (6 ftlb.)+/-1.5 Nm (+/-1.0 ftlb.)
9. Open and close loadspace cover -1-.