96151900 Removing and Installing Bulb For Floor Light

WM 961519 Removing and installing bulb for floor light

Bulb table










Removing bulb for floor light

1. Switch off ignition and remove ignition key.
2. Use a plastic spatula or screwdriver to lever out the light.





Levering out front footwell light





Levering out rear footwell light

3. Pull out light, press connector together -arrows a- and remove it.





Disconnecting rear footwell light

4. Use a screwdriver to carefully lever off the sheetmetal cover from the four locking elements.





Levering off sheetmetal cover from locking elements

5. Pull bulb out of holder.





Pulling bulb out of holder

Installing bulb for floor light

1. Insert bulb into holder.





Inserting bulb into holder

2. Position sheetmetal cover and press into place. Ensure that all four locking elements engage properly and the sheetmetal cover is not deformed.





Positioning sheetmetal cover and pressing into place

3. Push in connector until it is felt to engage.





Inserting plug connection

4. Insert light into the opening and press into place. Ensure light is fitted properly.