Glove Box Lamp: Service and Repair

WM 965919 Removing and installing bulb for glove compartment light

Information





Overview of lights






Removing bulb for glove compartment light

1. Switch off ignition and remove ignition key.
2. Use a plastic spatula or screwdriver to prise out the light.





Levering out the light

3. Pull out light, press on plug -arrows a- and remove it.





Removing plug

4. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.





Levering sheetmetal cover off

5. Pull bulb out of holder.





Pulling bulb out of holder

Installing bulb for glove compartment light

1. Insert bulb into holder.





Inserting bulb into holder

2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.





Positioning sheetmetal cover

3. Push in plug until it is felt to engage.





Connecting plug connection

4. Insert light into opening and press into place. Ensure light is fitted properly.