971519 Removing and Installing Front Wire Harness

WM 971519 Removing and installing front wire harness

Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"
2. Remove front direction indicator. -> 94541900 Removing and installing front direction indicator - section on "Removing" 945419 Removing and Installing Front Direction Indicator Light

Removing front wire harness





Installation position of front wire harness

1. Unclip plug connections on the front apron at the right.
1.1. Unclip plug connections -1 and 2- on the front apron -arrows A-.
1.2. Unclip front wire harness -4- at the line bracket -3- ( -arrow B- ).





Unclipping plug connections on front apron

2. Release connector -1- ( -arrow A- ) and pull it off the fog light -2- at the left and right -arrow B-.





Pulling connector off fog light

3. Take front wire harness -1- out of the air grille holders at the left and right -arrows-.





Removing front wire harness from air grille

4. Unclip front wire harness -1- from the radiator grille holders -arrows-.





Unclipping wire harness

5. Pull off connector on sensor for ParkAssist.
5.1. Release clips -arrows A- and remove sensor for ParkAssist -1- ( -arrow B- ).
5.2. Release connector -2- ( -arrow C- ) and pull it off sensor for ParkAssist -1- ( -arrow D- ).





Pulling off connector on sensor for ParkAssist

6. Remove front wire harness.

Installing front wire harness

1. Plug in connector on sensor for ParkAssist.
1.1. Plug in connector -2- on sensor for ParkAssist -1- ( -arrow A- ) until the connector -2- engages securely.
1.2. Press sensor for ParkAssist -1- into the mounting -arrow B- until the clips engage securely.





Plugging in connector on sensor for ParkAssist

2. Clip front wire harness -1- in at the holders -arrows-.





Clipping in wire harness

3. Insert front wire harness -1- into the air grille holders at the left and right -arrows-.





Inserting front wire harness into air grille

4. Push connector -1- onto the fog light -2- at the left and right -arrow- until the connector engages securely.





Pushing connector onto fog light

5. Clip front wire harness into the front apron at the right.
5.1. Clip front wire harness -4- and line bracket -3- into the front apron -arrow A-.
5.2. Clip plug connections -1 and 2- into the front apron -arrows B-.





Clipping front wire harness into front apron at the right

Subsequent work

1. Install front direction indicator. -> 94541900 Removing and installing front direction indicator - section on "Installing" 945419 Removing and Installing Front Direction Indicator Light
2. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"