340419 Removing and installing shift lever knob

WM 340419 Removing and installing shift lever knob

Removing shift lever knob





Overview of shift-lever knob

1. Put shift-lever knob in neutral position.
2. Unscrew fastening screws on centre console cover -right arrows- , tip cover up and back -curved arrow- and separate cable connection -inset-.





Centre console cover

3. Press leather boot out of centre console cover from below -arrows-.





Leather boot

4. Unlock shift-lever knob. To do this, turn the grooved end piece on the gearshift lever clockwise by a quarter of a turn until it engages.





Unlocking the shift-lever knob

Information

- Do not pull shift-lever knob off by pulling on the leather boot.

5. Grasp the shift-lever knob at the top end and pull off -arrow-.





Removing the shift-lever knob

Installing shift lever knob





Overview of shift-lever knob

1. Insert the shift lever knob from above until it engages.





Assembling the shift-lever knob

2. Lock shift-lever knob. To do this, turn the grooved end piece on the gearshift lever anti-clockwise by a quarter of a turn until it engages.





Locking the shift-lever knob

3. Fit leather boot into centre console cover from above.





Leather boot

4. Position cable connection -inset- on the underside of the centre console cover.





Centre console cover

5. Tip centre console cover backwards -curved arrow- and screw in fastening screws -right arrows-.