647519 Removing and Installing Side Window

WM 647519 Removing and installing side window

Technical values





Preliminary work

1. Open rear door and lid.
2. Remove rear roof trim panel -> 708519 Removing and installing rear roof trim panel - section on "Removing" 708519 Removing and Installing Rear Roof Lining.
3. Remove C-pillar trim -> 706819 Removing and installing C-pillar trim - section on "Removing" 706819 Removing and Installing C-Pillar Trim Panel.
4. Remove D-pillar trim -> 706919 Removing and installing D-pillar trim - section on "Removing" 706919 Removing and Installing D-Pillar Trim.
5. Remove rear side trim panel -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Removing" 700319 Removing and installing rear luggage compartment side-trim panel.
6. Remove rear handles at left and right -> 683719 Removing and installing rear handle - section on "Removing" 683719 Removing and installing rear handle.

Removing side window





1. Folding down roof lining

Information

Make sure that the roof cover does not buckle.

1.1. Carefully fold down roof lining -1- in the rear, side area ( -arrow A- ).





2. Removing side window
2.1. Unscrew and remove fastening nuts -2- on the side-window opening ( -arrow B- ).





2.2. Push side window -3- outward in the lower area -arrows C- and swivel it forward ( -arrow D- ).





2.3. Disengage connecting piece -6- of the side window trim strip -4- to the roof trim strip -5-. To do this, first pull the side window down slightly -arrow E- and then swivel it to the rear ( -arrow F- ).









2.4. Remove side window -3- to the outside.





3. Checking clips
3.1. Check fastening clips on the C-pillar -7- for damage; if necessary, replace them.





4. Check seals -- only if the side window is to be re-installed

Installing side window





1. Checking seals
1.1. Check rubber seal on the inside of the C-pillar decorative cover to ensure that it is fitted correctly and not damaged; if necessary, replace it.
1.2. Check side window seal for damage.
2. Installing side window
2.1. Engage connecting piece -6- of the side window trim strip -4- to the roof trim strip -5-. To do this, insert the side window trim strip from the rear into the roof trim strip -arrow A- and press upward slightly ( -arrow B- ).









2.2. Swivel side window -3- to the rear in the lower area -arrow C- and push it inward ( -arrows D- ).





2.3. Insert side window -3- inward into the side window opening ( -arrow E- ).





2.4. Screw in fastening nuts -2- ( -arrow F- ) and tighten to the specified tightening torque => Tightening torque: 4.5 Nm (3.5).





3. Folding up roof lining

Information

Make sure that the roof cover does not buckle.

3.1. Carefully fold up roof lining -1- in the rear, side area ( -arrow G- ).






Subsequent work

1. Install rear handles at left and right -> 683719 Removing and installing rear handle - section on "Installing" 683719 Removing and installing rear handle.
2. Install rear side trim panel -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Installing" 700319 Removing and installing rear luggage compartment side-trim panel.
3. Install C-pillar trim -> 706819 Removing and installing C-pillar trim - section on "Installing" 706819 Removing and Installing C-Pillar Trim Panel.
4. Install D-pillar trim -> 706919 Removing and installing D-pillar trim - section on "Installing" 706919 Removing and Installing D-Pillar Trim.
5. Install rear roof trim panel -> 708519 Removing and installing rear roof trim panel - section on "Installing" 708519 Removing and Installing Rear Roof Lining.
6. Close rear door and lid.