Windshield Washer Spray Nozzle: Service and Repair

WM 926619 Removing and installing spray nozzle

Removing spray nozzle

1. Open the bonnet.
2. Switch off ignition and remove ignition key.
3. Disengage cover -arrow A- , disconnect the electrical plug connection -arrow B- and pull the hose connection -arrow C- apart.





Removing spray nozzle cover

4. Pull the spray nozzle downwards -arrow A- and remove from the bonnet -arrow B- along with the connections.





Releasing spray nozzle

Installing spray nozzle

1. Insert spray nozzle along with the lines under the bonnet -arrow A- and engage -arrow B-.





Installing spray nozzle

2. Insert the lines through the opening, connect electrical plug connection -arrow B- and connect the water feed line -arrow A-. Position the cover -arrow C- under the bonnet.





Fitting cover for spray nozzle

Adjusting spray nozzles

NOTICE

Incorrect handling of spray nozzles

- Risk of damage to spray nozzles

-> Do not insert sharp objects into the nozzle bore.

Information

- The angle of the spray nozzle can be adjusted without the use of a tool, i.e. it can be adjusted by hand.

- The recommended spraying range is in the central position.

- Risk of damage to spray nozzles.

1. Close the bonnet.
2. Adjust the spray height -arrow-.





Adjusting the spray height