Fluid - M/T: Service and Repair

WM 340155 Changing transmission oil

Technical values





Information

Notes

Information

Fill only with oil approved by Porsche. See Spare Parts Catalogue.

Preliminary work

1. Raise the vehicle at the prescribed jacking points. -> 4X00IN01 Lifting the vehicle Service and Repair
2. Remove support plate. -> 421419 Removing and installing support plate - section on "Removing" 42141900 Removing and installing support plate
3. Place oil collection pan under the transmission.

Draining transmission oil

CAUTION

Oil fill level too low

- Risk of damage to components

-> Do not start engine.
-> Do not tow the vehicle.

WARNING

Risk of scalding from hot oil

-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)

1. Unscrew oil filler plug.





Filler plug

2. Unscrew oil drain plug and drain transmission oil.





Oil drain plug

Filling transmission oil

Filling transmission oil - 6-speed

CAUTION

Oil fill level too low

- Risk of damage to components

-> Do not start engine.
-> Do not tow the vehicle.

1. Clean oil drain plug and screw in with new sealing ring.





2. Fill with transmission oil.





3. Clean oil filler screw and screw in with a new seal.





Subsequent work

1. Fit support plate. -> 421419 Removing and installing support plate - section on "Installing" 42141900 Removing and installing support plate
2. Lower the vehicle.