558619 Removing and Installing Lower Part of Rear Lid Lock

WM 558619 Removing and installing lower part of rear lid lock

Technical values





Removing lower part of lid lock

Removing lower part of rear lid lock

1. Press flap on cover for rear lock support down.
2. Unscrew fastening screws -2- for the lower part of the lid lock.





Removing lower part of lid lock

3. Remove lower part of lid lock -1-.

Installing lower part of rear lid lock

1. Place lower part of lid lock -1- in installation position.





Installing lower part of lid lock

2. Tighten fastening screws -2- slightly.
3. Position lower part of lid lock -1- on the old impressions.





Adjusting lower part of lid lock

4. Tighten fastening screws => Tightening torque: 23 Nm (17 ftlb.) -2-.
5. Check adjustment of rear lid and re-adjust if necessary. -> 559015 Adjusting rear lid - section on "Adjusting" Adjustments