Clutch Switch: Service and Repair

WM 275819 Removing and installing clutch switch interlock

Preliminary work

1. Remove left front wheel.
-> 440519 Removing and installing wheel Removal and Replacement
2. Remove rear section of left front wheel housing liner.
-> 505619 Removing and installing front wheel housing liner - section on "Removing" Removal and Replacement.

Removing clutch switch interlock

Information

Installation position:

The clutch switch interlock is located under the wheel housing liner in the driver's side front wheel housing.

It is connected to the clutch master cylinder by a locking mechanism.





Component overview





1. Release and pull off electric push-on connector -3-.





Disconnecting plug connection

2. Release the locking mechanism of the clutch switch interlock by pressing to the rear with a screwdriver -a- and pull it down and off -B-.





Releasing and removing clutch switch interlock

Installing clutch switch interlock

1. Insert the clutch switch interlock upwards -arrow- and make sure that the locking mechanism engages securely.





Installing clutch switch interlock

2. Plug in electric push-on connector -3- and make sure that the locking mechanism engages securely.





Plugging in plug connection

Subsequent work

1. Install rear section of left front wheel housing liner.
-> 505619 Removing and installing front wheel housing liner - section on "Installing" Removal and Replacement.
2. Install left front wheel.
-> 440519 Removing and installing wheel Removal and Replacement