Power Mirror Switch: Service and Repair

WM 665419 Removing and installing switch for rear-view mirror

Preliminary work

Remove front door panel. -> 705919 Removing and installing front door panel - section on "Removing" 705919 Removing and installing front door panel

Removing switch for rear-view mirror

Information

Prior to starting with the removal, switch off the ignition and remove the ignition key.





Installation position of switch

1. Release the electric connector at the switch -a- and remove it -arrow B-.





Pulling off electric connector

2. Unclip the switch -arrows-.





Unclipping switch

3. Pull the switch out of the trim panel from behind -arrow-.





Pulling out switch

Installing switch for rear-view mirror

1. Position the switch and slide it in until the clips engage securely -arrow-.





Sliding in switch

2. Make sure that all the clips engage securely -arrows-.





Engaging clips

3. Insert electric connector at the switch -arrow- until the connector engages securely.





Plugging in electric connector

Subsequent work

Install front door panel. -> 705919 Removing and installing front door panel - section on "Installing" 705919 Removing and installing front door panel