Removing And Installing Front Wire Harness

Removing And Installing Front Wire Harness

Preliminary work
1. Remove the front apron.

Removing front wire harness
1. Release and unplug connector on sensors for ParkAssist (if connected) -b-.







2. Release and unplug connector on auxiliary headlight -a-.







3. Carefully open the clips using a screwdriver.










4. Remove wire harness.

Installing front wire harness

1. Position wire harness and clip it in.









2. Plug in connector on auxiliary headlight until the connector engages securely.







3. Plug in connectors on sensors for ParkAssist (if fitted) until the connectors engage securely.







Subsequent work
1. Install the front apron.