Adjusting Shift and Selector Cables
Adjusting shift and selector cables
Preliminary work for shift and selector cables
1. Remove shift-lever knob.
2. Remove switch console.
Adjusting shift and selector cables
1. Release the adjuster -arrows-.
Releasing adjuster
2. Align the gearshift bracket in neutral position using locking bridge 9619/2.
Aligning gearshift bracket
3. Move external shift mechanism on the transmission into neutral position.
Connecting operating cable to transmission
4. Lock the adjuster -arrows- into position.
Locking adjuster into position
5. Locking bridge 9619/2 can now be removed.
Subsequent work for shift and selector cables
1. Install switch console.
2. Install shift-lever knob.