Marker Lamp: Service and Repair

WM 942755 Replacing light bulb for marker light

Technical values





Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"

Removing light bulb for marker light

1. Unscrew the two fastening screws -1- and remove the cover.





Unscrewing fastening screws

2. Unplug electric connector.





Unplugging electric connector

Installing light bulb for marker light

1. Connect electric connector. Make sure it is seated securely.





Connecting electric connector

2. Fit cover (pay attention to guide pins) and screw in the two fastening screws -1-. => Tightening torque: 1.5 Nm (1.0 ftlb.)





Screwing in fastening screws

Subsequent work

1. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"