663419 Removing and installing side-section trim

WM 663419 Removing and installing side-section trim

Technical values





Preliminary work

1. Remove wheel. -> 440519 Removing and installing wheel - section on "Removing" 440519 Removing and installing wheel

Removing side-section trim





Installation location of side-section trim

1. Unscrew fastening screws -1- and remove side-section trim -2-.





Removing side-section trim

Installing side-section trim





Installation location of side-section trim

1. Check sheetmetal nuts -3- for deformation, replacing if necessary -3-.





Installing side-section trim

2. Insert side-section trim -2- and push retaining clip -4- into side panel.
3. Screw in fastening screws -1- and tighten to specified tightening torque=> : 1.5 ftlb..

Subsequent work

1. Install wheel. -> 440519 Removing and installing wheel - section on "Installing" 440519 Removing and installing wheel