708219 Removing And Installing Front Trim

WM 708219 Removing and installing front trim

Technical values





Preliminary work

Remove operator control unit for garage door opener. -> 96781900 Removing and installing operator control unit for garage door opener - section on "Removing"

Removing front trim.

Removing front trim panel





Installation position of front trim panel

1. Remove front trim panel.
1.1. Unclip covers -1- on the front trim panel -3-.
1.2. Unscrew fastening screws -2- and remove front trim panel -3- in a downward direction -Arrow- until the connector for the interior light -4- is accessible.
1.3. Release connector for interior light -4- ( -Arrow A- ) and pull off connector -Arrow B-.
1.4. Remove front trim panel -3-.





Removing front trim panel

Installing front trim

Installing front trim panel

1. Install front trim panel.
1.1. Position front trim panel -3- ( -Arrow- ).
1.2. Connect connector for interior light -4- ( -Arrow- ) until the connector engages securely.
1.3. Secure front trim panel -3- with the fastening screws -2-. => Tightening torque: 2.3 Nm (2.0 ftlb.)
1.4. Clip covers -1- into the front trim panel -3-.





Installing front trim panel

Subsequent work

Install operator control unit for garage door opener. -> 96781900 Removing and installing operator control unit for garage door opener - section on "Installing"