Front Bumper Bracket: Service and Repair

WM 633319 Removing and installing front bracket (impact pipe)

Technical values





Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"
2. Remove front bumper. -> 631019 Removing and installing front bumper - section on "Removing" Service and Repair

Removing front bracket (impact pipe)

Removing front impact pipe





Overview, front impact pipe

1. Undo fastening screws -1-.





Removing front impact pipe

2. Remove the impact pipe -2- and seal -3-.

Installing front bracket (impact pipe)

Install front impact pipe





Overview, front impact pipe

1. Position the seal impact pipe -3- and impact pipe -2-.





Install front impact pipe

2. Screw in fastening screws M8 x 30 -1- and tighten using tightening torque=> Final tightening: 17 ftlb..

Subsequent work

1. Install front bumper. -> 631019 Removing and installing front bumper - section on "Installing" Service and Repair
2. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"