558719 Removing and Installing Rear upper Part of Lid Lock

WM 558719 Removing and installing rear upper part of lid lock

Technical values





Removing rear upper part of lid lock





Installation position of upper part of rear lid lock

Information

- Mark installation position of upper part of lid lock with respect to the lid.

1. Open the rear lid.

Information

Fastening nuts must not be used again following removal.

2. Unscrew -1- fastening screws and remove upper part of lid lock -2-.





Removing rear upper part of lid lock

Installing rear upper part of lid lock





Installation position of upper part of rear lid lock

1. Position upper part of rear lid lock -2- and tighten the fastening screws -1- slightly.





Installing rear upper part of lid lock

2. Adjust upper part of lid lock -2- in relation to the lid according to the noted position, if necessary, determine left and right gap.
3. Tighten fastening screws -1-. => : 9.7 Nm (7.0 ftlb.)
4. Check lid function.

Checking lid functions

1. Close the rear lid and lock it.
2. Check that the rear lid is held down by the safety hook (locking hook) after the lid lock has been opened.
3. Check return spring on lower part of lock pulls back the safety hook as far as the stop when lid is open.