741319 Removing and installing cover for front seat

WM 741319 Removing and installing cover for front seat

Preliminary work

Information

- The front-seat air cushions must be bled before removing the front seat.

- Only for adaptive sports seats.

1. Remove control part trim panel. -> 721619 Removing and installing control part trim panel - section on "Removing" 721619 Removing and installing control module trim panel
2. Position front seat on assembly fixture.





Front seat on assembly fixture

Removing cover for front seat





Installation position of cover for front seat

1. Press cover piping at rear carefully out of the seat frame using a screwdriver -arrows-.





Pressing out cover at rear

2. Slightly loosen cover piping -1- with a screwdriver and pull out all around by hand.





Pulling out cover

3. Unclip fixing clips -1- with a screwdriver.





Unclip fixing clips

4. Cut open cushion clips -1- with side cutters and remove cover -2- from padding.





Loosening cover from padding

Subsequent work

Install control module trim panel (electric). -> 721619 Removing and installing control module trim panel - section on "Installing" 721619 Removing and installing control module trim panel