Power Door Lock Switch: Service and Repair

WM 577819 Removing and installing central locking switch

Removing central locking switch

Information

The central locking switch is located in the centre air vent.





Overview of switch for central locking

1. With a screwdriver through the top air slot, release the left and right retaining clip -A- and pull the air vent out of the dashboard.





Releasing the air vent

2. Pull apart the electrical plug connections and remove the air vent.





Electrical connectors

3. Unclip and take off central locking switch from the air vent.

Installing central locking switch

1. Position central locking switch and push it into the air vent.
2. Push together the electrical plug connections.





Electrical connectors

3. Observe the line routing and insert the air vent into the dashboard until it clicks into place.
4. Check function of air vent illumination, the air vent adjustment, the hazard warning light switch, and the central locking switch.