705155 Replacing sound absorber (insulation) for passenger compartment

WM 705155 Replacing sound absorber (insulation) for passenger compartment

Tools






Preliminary work

1. Remove accessories close to the sound absorber (insulation).

Information

- The sound absorbers (insulation) must always be replaced if they are damaged or cracked.

2. Remove sound absorber (insulation).
3. Remove all adhesive residue on the body/accessories and clean with cleaning solution.

Installing sound absorber (insulation) for passenger compartment

Installing sound absorber for convertible top rest





Installation position of sound absorber (insulation) for passenger compartment

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Pull off protective film and stick on insulation for convertible top rest -1, 2-.





Installing insulation for convertible top rest

Installing sound absorber for control units

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Pull off protective film and stick on sound absorber for control units -1-.





Installing sound absorber for control units

Installing insulation for rear wall

1. Pull off protective film and stick on insulation for rear wall -1- in the marked area.





Installing insulation for rear wall

2. Pull off protective film and stick on insulation for top of rear wall -2- in the marked area.
3. Heat up insulation for rear wall at the bottom -1- and top -2- using a Leister Elektron hot-air gun; see Tools and Equipment00000 and press on securely using a rubber roller.

Installing sound absorber for firewall lid

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Pull off protective film and stick insulation for firewall lid -1- to the firewall lid -2-.





Installing sound absorber for firewall lid