705255 Replacing sound absorber (insulation) for wheel housing

WM 705255 Replacing sound absorber (insulation) for wheel housing

Tools






Preliminary work

1. Remove accessories close to the sound absorber (insulation).

Information

- The sound absorbers (insulation) must always be replaced if they are damaged or cracked.

2. Remove sound absorber (insulation).
3. Remove all adhesive residue on the body/accessories and clean with cleaning solution.

Installing sound absorber (insulation) for wheel housing

Installing insulation for rear wheel housing

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Pull off protective film and stick on insulation for rear wheel housing -1- in the marked area.





Installing insulation for rear wheel housing

2. Heat up insulation for rear wheel housing -1- using a Leister Elektron hot-air gun; see Tools and Equipment00000 and press on securely using a rubber roller.

Installing sound absorber for rear wheel housing

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Insert sound absorber for rear wheel housing -1-.





Installing sound absorber for rear wheel housing

Installing sound absorber for front wheel housing

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Pull off protective film and stick on sound absorber for front wheel housing -1- in the marked area.





Installing sound absorber for front wheel housing