Fuel Pump Control Unit: Service and Repair

WM 207019 Control unit for fuel pump

Preliminary work

Preliminary work for control unit for fuel pump

Remove battery cover. -> 27121900 Removing and installing battery cover - section on "Removing" 27121900 Removing and installing battery cover.

Remove right plenum panel cover. -> 85221900 Removing and installing cover - section on "Removing" 85221900 Removing and installing cover.

Removing control unit for fuel pump





Installation position

Information

The fuel pump control unit is replaced together with the holder.

1. Unscrew the two fastening nuts -1- , used to secure the holder for the fuel pump control unit, on the bulkhead.





Removing control unit with holder

2. Unlock electric plug connection -a- and remove the fuel pump control unit together with the holder.





Disconnecting electric plug connection

Installing control unit for fuel pump

Information

The fuel pump control unit is replaced together with the holder.

1. Connect electric plug connection to the fuel pump control unit until the connector engages securely.





Connecting plug connection and securing holder

2. Slide the holder with the fuel pump control unit onto the studs on the bulkhead.
3. Secure the holder and fuel pump control unit using the two fastening screws -1-.

Subsequent work

Subsequent work for control unit for fuel pump

Install right plenum panel cover. -> 85221900 Removing and installing cover - section on "Installing" 85221900 Removing and installing cover.

Install battery cover. -> 27121900 Removing and installing battery cover - section on "Installing" 27121900 Removing and installing battery cover.