Tire Pressure Module: Service and Repair

WM 443419 Removing and installing control unit for Tyre Pressure Monitoring (TPM)

Tools






Preliminary work

Preliminary work for tyre pressure monitoring system (RDK) control module

-> 703019 Removing and installing luggage-compartment cover - section on "removing" 70301900 Removing and installing front luggage compartment cover

Installing control unit for Tyre Pressure Monitoring (TPM)

Information

Before installing the control unit for Tyre Pressure Monitoring (TPM), visually check the control unit and plug connection with regard to the following points:

- Damage to the housing.

- Damage to the contacts on the control unit.

- Damage to the connector and contacts on the vehicle wire harness.

- Dirty contacts.

If the control unit is damaged, replace it.

If the wire harness, connector or contacts are damaged, repair them in accordance with the relevant safety instructions using the Repair kit for Cayenne wire harnesses NR.155-2.

If the contacts are dirty, clean them.

1. Plug in electric connector on the control unit and lock connector -B-.





Plugging in and locking connector

2. Position control unit and secure with both fastening nuts.





Positioning and securing control unit

Subsequent work

Rework on tyre pressure monitoring system (RDK) control module

-> 703019 Removing and installing luggage compartment cover - section on "installing" 70301900 Removing and installing front luggage compartment cover