280455 Eliminating noise symptoms - Replacing ignition starter switch

WM 280455 Eliminating noise symptoms - Replacing ignition starter switch

General information

Symptoms

Buzzing noises from around the ignition starter switch.

Causes and remedial action

Buzzing noises can be heard while driving due to the reset spring in the ignition starter switch.

In the event of a complaint, the ignition starter switch must be replaced to remedy the situation on vehicles manufactured before the date of introduction September 2007.

Tools and materials

Materials






Replacing ignition starter switch

1. Replace ignition starter switch.





Installation position of ignition starter switch

1.1. Remove ignition starter switch. => 28041900 Removing and installing ignition starter switch - section on "Removing"
1.2. Install new ignition starter switch. => 28041900 Removing and installing ignition starter switch - section on "Installing"

Working times

28041900: Removing and installing ignition starter switch; Labor time 40 TU