392219 Removing and installing sealing ring for right halfshaft flange

WM 392219 Removing and installing sealing ring for right halfshaft flange

Tools






Preliminary work

1. Raise the vehicle at the prescribed jacking points. => Raising the vehicle
2. Remove the underbody panel. -> 519419 Removing and installing rear cover - section on "removing" 519419 Removing and Installing Cover for Rear Underbody
3. Remove right halfshaft flange. => Removing and installing halfshaft flange - "Removing" section

Removing sealing ring for right halfshaft flange

1. Lever the sealing ring out of the transmission.





Levering out the sealing ring

Installing sealing ring for right halfshaft flange

1. Screw M10 x 30 hexagon-head bolt into side A of Pressure piece 9734.





Screw in special tool

2. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on side B of pressure piece 9734.





Sealing ring on special tool

3. Hammer the sealing ring along with pressure piece 9734 completely into the transmission by hitting the hexagon-head bolt.





Tapping in sealing ring

Subsequent work

1. Install the right halfshaft flange. => Removing and installing halfshaft flange - "Installing" section
2. Check transmission oil level. -> 340101 Checking transmission oil
3. Fit the underbody panel. -> 519419 Removing and installing rear cover - section on "installing" 519419 Removing and Installing Cover for Rear Underbody
4. Lower the vehicle.