340819 Removing and installing gearshift bracket

WM 340819 Removing and installing gearshift bracket

Tools





Technical values






Preliminary work

1. Remove shift-lever knob. -> 340419 Removing and installing shift-lever knob - removing 340419 Removing and installing shift lever knob
2. Remove centre console. -> 681719 Removing and installing centre console - removing 681719 Removing and installing centre console

Installing gearshift bracket

1. Fit gearshift bracket and screw in nuts.





Installing gearshift bracket





2. Locking bridge 9619/1 must be fitted on the gearshift bracket.





Fitting locking bridge

3. Clip in supports on the gearshift bracket. The support with the blue hinged tube must be fitted on the left and the support with the black hinged tube must be fitted on the right.





Clipping in supports

Information

Before starting to install the gearshift bracket, ensure that the transmission is in neutral.

4. Engage adjustment pin on pre-selector and shift connections.





Engaging shift cables

5. Close bayonet locks on the pre-selector and shift connections.





Closing bayonet locks

6. Remove locking bridge.





Removing locking bridge

Subsequent work

1. Install centre console. -> 681719 Removing and installing centre console - installing 681719 Removing and installing centre console
2. Install shift-lever knob. -> 340419 Removing and installing shift-lever knob - installing 340419 Removing and installing shift lever knob