643719 Removing and installing microswitch for window opening controls

WM 643719 Removing and installing microswitch for window opening controls

Technical values






Preliminary work

1. Remove door unit carrier. => 5730 Removing and installing door unit carrier - removing

Removing microswitch for window opening controls

Unclipping electric wire for micro switches





Overview, removing and installing door handle

1. Unclip electric wire for microswitch -1- from the bottom part of door handle -2-.





Unclipping wire

Removing microswitch for window opening controls





Install location for window opening microswitch

1. Unscrew fastening nuts -1-.





Removing microswitches

2. Pull bottom section of door handle -2- slightly backwards.

Information

- Make sure that the locking lug on the door handle does not break when removing the microswitch.

3. Gently loosen the locking tab -arrow A- and remove the microswitch -3- -arrow B-.

Installing microswitch for window opening controls





Install location for window opening microswitch

1. Position microswitch -3- on the door handle -4- and press in until it can be felt to engage.





Installing microswitch

2. Position the lower part of the door handle -2- under the handle and screw down with fastening nuts -1-. Tightening torque => Final tightening: 9.7 Nm (7 ftlb.)

Clipping in the electric wire for micro switches





Overview, removing and installing door handle

1. On the bottom part of door handle -2- clip in the electrical wire -1-.





Clipping in wire

Subsequent work

1. Install door unit carrier. => 5730 Removing and installing door unit carrier - installing
2. Check window opener.
2.1. Close the doors.
2.2. Actuate the door handle until the window lowering function is activated.