619019 Removing and installing hood compartment lid

WM 619019 Removing and installing hood compartment lid

Removing hood compartment lid

Loosening wire harness for SDARS antenna





Installation position of hood compartment lid

1. Cut tie-wrap -2- on wire harness for SDARS antenna -1-.





Loosening wire harness

2. Unclip plug connection for SDARS antenna -3- from the bracket -4- ( -arrow A- ).
3. Release plug connection for SDARS antenna -3- at the locking lug and pull it off -arrow B-.
4. Disengage wire harness for SDARS antenna -2- at the fastening part -5- in -direction of arrow C-.

Removing hood compartment lid

1. Loosen fastening nuts -2- at the left and right and lift hood compartment lid -1- up and off with the help of a second person -arrows-.





Removing hood compartment lid

Installing hood compartment lid

Locking wire harness for SDARS antenna

1. Press in wire harness for SDARS antenna -1- at the fastening part -5- ( -arrow A- ).





Securing wire harness

2. Connect plug connection for SDARS antenna -3- ( -arrows B- ) until it engages securely.
3. Clip plug connection for SDARS antenna -3- into the bracket -4- ( -arrow C- ).
4. Secure wire harness for SDARS antenna -1- with a tie-wrap -2-.