619119 Removing and installing additional flap

WM 619119 Removing and installing additional flap

Preliminary work

Move convertible top to service position. -> 6101IN IN -Convertible top in service position

Removing additional flap





Installation location additional flap

1. Press locking lever -1- toward the front -arrow A- (direction of travel).





Removing additional flap

2. Pull additional flap -2- backward -arrow B- and pull downwards out from hinge pins B of the convertible-top compartment lid -3- -arrow C-.

Installing additional flap





Installation location additional flap

1. Insert additional flap -2- upward onto hinge pins of the convertible-top compartment lid -3- -arrow A- and pull forward -arrow B-.





Installing additional flap

2. Pull locking lever -1- backward -arrow C- (against direction of travel) to lock the additional flap. The additional flap -2- is locked if locking lever -1- projects approx. 5 to 8 mm over the body of the additional flap in the area of dimension -X-.
3. End convertible top service position.